2009-2018 Tacoma Cruise harness for A/T and M/T

Description

This item listing DOES NOT INCLUDE instructions.
Up for sale ... For Automatic or Manual Transmission vehicles.
The wiring that will connect from the base of the steering
column at the clock spring connector to the ECM using OEM pins.
The wiring that is required on earlier models for the horn lead.
The wiring that is sometimes needed to connect the clutch OEM
connector to the ECU.  *** See note below. ***
This listing also includes the wire
that
goes from the
instrument
cluster to the ECM, which is often needed on 2009-2012.
This is ONLY the wires with the connectors attached.
If you have question, please ask.
***Note - I have sold a number of these as well as complete cruise kits
for the 007-2017 Tacoma.   Sometimes the clutch switch connector is
there, but is not routed to the ECU.  For that reason, I have included an
extra wire which will go from the clutch switch harness to the ECU, as
well as the quick connector to make is relatively easy to install. ***